Proper installation of pipe filters

The preparatory work ‌

Tools: wrench, pliers, raw material belt, filter bottle, filter element, etc.

Close the water inlet valve to prevent water loss during construction.

For details, ‌

1. Remove the faucet and water inlet pipe for subsequent installation.

2. Clean the filter bottle and rinse it with water. If there is more dirt on the filter, you can use a professional water treatment agent to clean.

3. Install the new filter element, and fix the filter bottle and filter element tightly with the raw material belt.

4. Connect the inlet water pipe and outlet water pipe to ensure that the connection is firm.

5. Open the inlet valve and outlet valve to confirm whether the water flows out normally.

5. Check whether the installation is normal, including whether the filter element is firmly installed and whether the water inlet pipe is sealed.

Precautions ‌

1. The installation of Y-type filter should be carried out according to the flow direction and recommended installation method and installation requirements as shown in the product sample provided by the manufacturer and installation instructions.

2, the filter upstream and downstream can be set according to the needs of the process production differential pressure meter or pressure gauge to judge the blockage situation.

3, the basket filter is usually used for large-caliber steam pipelines, and can only be installed on horizontal pipelines.

4, the installation direction of the cone filter should be determined according to the specific use of the situation, to ensure that it is not easy to plug.

Frequently asked questions ‌

If the manual control state does not work properly, the automatic control state will not work properly.

Check the working status of the filter regularly and clean or replace the filter element in time.